Contact us at |support@ssldragon.com

Sectigo PositiveSSL Multi-Domain (UCC/SAN)

Ideally for

Blog | Personal Site | Portfolio | Basic domain(s)

Domains Included

3 domains by default (1 in CSR + 2 SANs – add more SANs on the Checkout Page)

Additional Domain/SAN

$12 USD

Max # of SANs

250

Brand

Sectigo

Validation

Domain Validation SSL

Issue time

5 minutes

Server Licensing

Unlimited

Secures

Multiple Domain SSL (UCC/SAN)

With / without "www"

No

Supported Browsers

99.3%

Documents

No documents required

Support for SAN (UC)

Yes

Secure Hash Algorithm

SHA-2

Key Encryption

2048 bit

Certificate Encryption

Up to 256-bit

Site Seal

Static

Refund

25 days

Warranty

$10,000

Sectigo PositiveSSL Multi-Domain (UCC/SAN) is our cheapest and most popular multi-domain certificate. If you need to secure several websites, this certificate is the fastest way to do it. You can get it in five minutes with domain verification only. Sectigo PositiveSSL Multi-Domain (UCC/SAN) is the most cost-effective solution to encrypt your entire web portfolio. It comes with the following features:

Domain Validation

You can get this certificate up and running in less than half an hour. The validation process is automated and lasts around five minutes. Add 15-20 minutes for installation, and you’ll have all your sites encrypted in no time.

Secures 3 domains by default – up to 250 additional domains

Whether you have a couple of personal sites or an entire network of blogs, this certificate will take care of the encryption side of all your websites. Sectigo PositiveSSL Multi-Domain secures 3 domains by default and up to 250 SANs on request. For a budget-friendly product, you get unparalleled value for your money.

Compatible with almost any platform

This multi-domain certificate can secure not only hundreds of sites but also work on hundreds of platforms. It’s also compatible with 99.3% of browsers. All your visitors will see the SSL padlock indicator next to the URL.

Unbreakable Encryption

All Sectigo certificates come with 256-bit encryption and a 2048-bit RSA signature key. You can also use Elliptic Curve Cryptography if your server supports it. This industry-standard technology is more than enough to protect sensitive data on the Internet.

$10,000 Warranty

If a catastrophic PKI failure happens on Sectigo’s end you’ll be covered with a generous warranty up to $10.000. You don’t have to worry about data breaches and your visitors’ privacy.

Site Seal

You also get the static Sectigo Secure site seal that you can put in a preeminent place on your website to boost visitors’ confidence when browsing your site. With a popular trust indicator on your pages, users are more likely to share their personal information with you.

Unlimited server licensing and unlimited reissues

This EV multi-domain certificate can be re-issued free of charge an unlimited number of times. You can use it on as many servers as you need until the expiration date.

21 reviews for Sectigo PositiveSSL Multi-Domain (UCC/SAN)

  1. Timothy

    I needed an affordable multi-domain certificate to encrypt my blogs within multiple niches. I found this certificate via a search query on Quora, and I’m very satisfied with how cost-effective and convenient it is.

  2. Jenny

    Issued within minutes. The price is mind-blowing. Will renew it again and again.

  3. Joseph

    I’ll be concise. If you run multiple websites, get this cert. You’ll thank me later!

  4. Lee

    Nothing beats the amazing price!

  5. Anew

    Wasn’t sure it will work on some old browsers, but it does!

  6. Rossenior

    Cheaper than a lot of one domain DV certificates. Comodo is by far the best provider.

  7. Malinda

    I’ve had this certificate for two years, and now its renewal time again. Just wanted to let everyone know that it’s a great option for regular websites.

  8. Vajèn

    I use it to protect a couple of sites. Works perfectly.

  9. Thomas

    Easy to validate and very affordable.

  10. Shola

    If you don’t need BV or EV certificates, this, in my opinion, is the best option to secure multiple domains.

  11. Maggie

    I gave this product five stars because of its amazing price.

  12. Rio

    Bought this certificate for 3 domains (2 SANs). Worked great! Thanks. Will buy again.

  13. Fan of the sea

    Passed the validation in five minutes. The installation was more difficult than I expected, but after a few attempts, I managed to configure it correctly for all my domains.

  14. Kareen

    It’s cheap and so fast to obtain. My blogs are now more secure.

  15. Edward

    When I saw that additional SANs are just $10 per domain, I ordered this cert straightaway. I planned a pretty large budget to secure my 14 domains, but with this certificate, I spent only half of it.

  16. Mitchell

    I secured several domains with this one certificate, and it worked great. Also, the price was really good when compared with other vendors. Thanks!!

  17. Doug

    You won’t get a better deal for a Multi-Domain certificate. Grabbed it with both hands once I saw the price.

  18. bernard

    excellent choice if you have several different domains

  19. Daren

    The most affordable multi-domain ssl certificate

  20. paco

    had to get an ssl for 37 domains, and this looked like the best option. we spend a little bit more time setting up the DNS records, but I think it’s worthy for a all-in one solution.

  21. Billy

    Best price for a multi-domain ssl on the market

Add a review

Your email address will not be published.

Here is a list of the most common questions our customers have when buying a Multi-Domain (UCC/SAN) SSL Certificate with Domain Validation:

What are Multi-Year SSL Subscription Plans?

Starting with August 19th, 2020, the maximum duration of publicly-trusted SSL/TLS certificates issued by all Certificate Authorities (CAs) has been set to a maximum of 13 months.

However, in order to make your SSL Management process time-saving and cost-effective, the CAs and SSL Dragon are offering you the 2 Year and 3 Year SSL Subscription Plans.

This means that you can still buy a 2 or 3 year SSL Certificate and continue to benefit from multi-year discounting, while still remaining compliant with the CAB Forum SSL requirements.

How the Multi-Year SSL works?

Due to security reasons, your SSL certificate is initially issued with a maximum 1-year validity.

30 days before the expiration of your certificate, SSL Dragon, on behalf of the CA, will notify you and ask you to reissue your SSL, in order to get the additional (replacement) 1-year certificate, according to your Subscription Plan.

This FAQ explains to you how to reissue your SSL Certificate, step by step.

You will need to validate & install the replacement SSL:

a. If you have a Domain Validation SSL Certificate, a short verification of your domain name will be required via Email, HTTP, or DNS in order to issue the 1-yr replacement SSL.

b. If you have a Business or Extended SSL Certificate – an additional Business Validation/Extended Validation recheck and callback process will also be required.

You can still reissue your certificate at any time and as many times as you like during your Multi-Year SSL Subscription Plan.

On your SSL Certificate’s page within the SSL Dragon account, you will find all the details regarding your Subscription Plan:

  • Valid From – Shows the date when your SSL was issued and became active
  • Expires – Shows the date when your SSL expires and needs to be reissued (not Renewed).
  • Subscription Starts – The date when the first SSL was issued and the subscription period activated
  • Subscription Ends – The date when the subscription ends and SSL needs to be Renewed (not Reissued)
  • Next Reissue – shows the number of days left of your SSL. The Certificate should be reissued 30-days prior to this date.

The Domain Validation (DV) SSL certificate is the most affordable choice for increasing the security of your blog, personal or small business website. Since there is no required paperwork, the process of acquiring the Domain Validation certificate is very quick and easy: you will have to prove that you are the domain owner just by responding to an automatic e-mail message. After a couple of minutes, you will receive the issued SSL certificate which can be installed immediately. Sites with Domain Validation certification can be identified by the padlock that is displayed by most web browsers.

This type of SSL certificates is recommended to be used if you need to prove that your site is secured, by having a secured connection. The Domain Validation certificates don’t display the legal entity, as the identity of the website owner is not checked while issuing them. So, if you have an e-commerce website or a site that collects users’ personal data, you should consider buying our Business Validation (BV) or Extended Validation (EV) certificates, which will make your site more trustworthy.

When requesting an SSL Certificate you have to prove that you own or you have management rights over the domain or sub-domain that you are requesting an SSL Certificate for.

STEP 1: Domain Validation (DV)

A. EMAIL

If you have an SSL Certificate issued by Sectigo, GoGetSSL, GeoTrust, Thawte, DigiCert, and RapidSSL, then you can complete the domain validation is by responding to an automated domain validation message sent to your email address. You will be given a list of emails to choose from, and the automated domain validation message will be sent to the email address that you choose.

Always check your email address (including your Spam folder) so as you should receive an email message from the Certificate Authority with instructions on how to validate (prove the ownership of) your domain name. The email message will ask you to copy a unique code and paste it on a specific link provided in the same email message.

Important: Only 5 e-mail addresses are allowed for domain validation: [email protected], [email protected], [email protected], [email protected], and [email protected]
In some cases, the Certificate Authority may allow your administrative e-mail from WHOIS, too, but ONLY IF the Private registration is disabled.

B. HTTP / HTTPS method

The HTTP validation consists of uploading a TXT validation file to a pre-defined location on your website. You have to make sure that you can access this file and link from any web browser. Once you proceed with this domain validation method, the CA will run a scan of your website and will look particularly for this file at the given link. Your SSL Certificate will pass the domain validation within a few minutes after the CA’s crawler system finds the TXT file on your website.

The HTTPS validation method is the same validation method as described above. You should choose the HTTPS option if you already have an SSL Certificate installed on your website.

C. DNS method

You can also add a pre-defined domain record to your domain registrar (the website where you registered your domain name). Make sure that your firewall doesn’t block the CA’s validation robot.

Sectigo and GoGetSSL require CNAME DNS type, which looks like:

_b2013ea8353c9760c0221c49dc3e8ca7.yourwebsite.com CNAME
165b83449f4fdf83021de4e6f6ee795a.4ae75dbefe3r7bb8a1878616d8b5ae4.5r4r46855d28f6903.comodoca.com

while DigiCert (Thawte, GeoTrust, RapidSSL) require TXT DNS type, which looks like:

yourwebsite.com TXT “w34f54t4t45t354eer98rn4jf4449nfrf”

or

dnsauth.yourwebsite.com TXT “w34f54t4t45t354eer98rn4jf4449nfrf”

Please note that newly added DNS records take between 10-48 minutes to propagate. This means that you will have to wait up to 48 hours to pass the domain validation if you go with this method. That is why we recommend the Email, HTTP, and HTTPS methods better because they would allow you to pass the domain validation instantly.

STEP 2: CAA Check

As of 8th September 2017, all Certificate Authorities (CAs) are obliged to respect your CAA policy, as a security measure.

The CAA record should allow the CA to issue the SSL for your domain name, otherwise, the order would be set as Pending until you update the record.

By default, if no CAA record found, any CA may issue SSL for your domain name. Otherwise, you should update your CAA record.

Here is how to do it:
– https://support.sectigo.com/Com_KnowledgeDetailPage?Id=kA01N000000zFMO
– https://docs.digicert.com/manage-certificates/dns-caa-resource-record-check/

Here is how to test the record:
– https://toolbox.googleapps.com/apps/dig/#CAA/
– https://caatest.co.uk/scan.org.ua

Optional (Rare) – Brand Validation (Manual Check)

In some cases, the CAs may require manual verification if your order fails any internal rules of Brand Validation.

It takes around 24-48 hours to pass this manual check, and the CA will either issue or reject an order in such cases.

Here are the reasons why your order is under Brand Validation.


How to change the domain validation method?

If you chose one of these domain validation methods described above, and you see that your domain doesn’t get validated, then you can always change your domain validation method. Please go to this link to learn how to do that.

In order to buy a Domain Validated certificate, you do not need to provide any documentation. You will have to confirm the domain ownership through a simple email or file-based authentication. Following completion of one of these elements, the DV certificate will be signed and released to you.

The Subject Alternative Name (SAN) SSL certificate, also called the Unified Communication Certificate (UCC) or the Multi-Domain SSL certificate was particularly developed to secure all your domains and subdomains by owning one single SSL certificate. This type of certificate ensures the security for both, your internal and external domains/subdomains and is fully compatible with your Microsoft Exchange products and Microsoft Office Communications Server.

UCC/SAN SSL certificates are not just easy to be managed but are the most cost-effective option. These certificates give you the opportunity to secure your main domain, for example, ssldragon.com, together with many other totally distinct domains, like ssldragon.net, ssldragonsslcertificates.com and its subdomains mail.ssldragon.com and account.ssldragon.com – all with 1 single certificate. Besides, unlike Wildcard SSL certificates, UCC/SAN certificates are available in all three validation methods: Domain Validation (DV), Business Validation (BV) and Extended Validation (EV).

You can find our full list of Multi Domain (UCC/SAN) SSL Certificates at this link.

multi-domainA Multi-Domain (SAN) SSL Certificate is specifically created to allow users to secure multiple domains and/or multiple sub-domains with one single SSL Certificate. Depending on the SSL Certificate product and brand, the certificate will include a different number of additional domains (called SANs) at the price quoted on the SSL Certificate’s details page (see screenshot on the right).

For example, a Multi-Domain (SAN) SSL Certificate that has 4 domains by default allows you to secure:

  • Four different domains:
    1. mysite.com
    2. example.com
    3. abcxyz.com
    4. demo123.com
  • Four different subdomains:
    1. my.example.com
    2. mail.example.com
    3. test.mysite.com
    4. account.mysite.com
  • Four different domains and subdomains:
    1. example.com
    2. my.example.com
    3. abcxyz.com
    4. mail.demo123.com

sanNOTE: Here is how you should configure your Multi-Domain SSL Certificate on our website: When you generate a CSR (Certificate Signing Request), please include one single domain name or sub-domain in it, such as: www.example.com. The rest of the domains or sub-domains, which are called SANs (2nd, 3rd, 4th domains or sub-domains) should be included in the fields for additional domains. You will see the fields for additional domains on the SSL Certificate configuration form, right under the text area for the CSR (see screenshot on the right).

multi-domain2When you buy or configure your Multi-Domain (SAN) SSL Certificate, please note that most Multi-Domain Certificates do not secure the domains with and without “www”. With other words if you want to secure both, example.com and www.example.com under one single Multi-Domain Certificate, that will be considered as two different domain names. The screenshot on the right shows you where you can find the attribute that tells you if your Multi-Domain Certificate secures both “www” and “non-www” under one single domain (SAN), or not.

Anyway, that is not a problem so as you cannot have the same website open both as www.example.com and as example.com. All website owners only choose one of these options and make the other option automatically re-direct to the other. For example, you can choose your website to always open at www.example.com and anybody who enters on example.com is automatically redirected to www.example.com. In this way, you only have to secure one domain, and that is: www.example.com.

The multi-domain certificate can be initially activated for the primary domain name.

If you wish to add more domains later, you need to reissue the certificate in your SSLDragon.com account, and add the SAN (additional domain) list in the SAN field, when reissuing.
due-date-2
due-date-2
If you need to add more domains than included by default, then please choose the Add More SANs option in order to pay for and activate the additional SANs.

When you buy a multi-domain SSL Certificate and you include several domain names and/or sub-domains in it, the Certificate Authorities require you to pass the domain validation for each and every domain name and/or sub-domain that you included in your multi-domain SSL Certificate, and only after that, the multi-domain SSL Certificate will be issued to you.

POSSIBLE PROBLEM: Sometimes the email addresses, or your HTTP options, or the DNS records that you choose for your multi-domain certificate do not get set correctly when they reach the Certificate Authority. You will know that when you see that you only got one single domain validation message to your email address instead of getting several domain validation messages, or your multi-domain SSL Certificate’s status still shows as “Awaiting Validation (Full)” even though you passed the domain validation for one of the domains.

partner-order-idHOW TO FIX: There is an easy way to fix that, and that requires getting in contact with the Certificate Authority’s Validation Department. When you contact them, please provide them your “Partner Order ID” (see screenshot on the right), and then tell them about the domain validation method that you chose to go with: HTTP, DNS, or Email. If you chose to pass the domains validation by email, then double-check with the Validation Department representatives what email addresses are set in their system, and ask them to send you the domain validation messages to your desired email addresses.

Sectigo/GoGetSSL

Please call Sectigo Validation Department at +1 (888) 266-6361 (Ext 4) or https://sectigo.com/support for the above-stated reasons. When you talk to them, you will need to provide them your “Partner Order ID”.

Thawte, GeoTrust, DigiCert

Please call Thawte, GeoTrust, DigiCert Validation Department at +1 (520) 477-3152 (Ext 2) for the above-stated reasons. Please note that Thawte, GeoTrust, DigiCert are all owned by DigiCert, and they all have the same phone number provided above.  When you talk to them, you will need to provide the “Partner Order ID”.

You can receive a refund ONLY for the additional domains (SANs) that you bought and NOT used.

If you have already activated the SAN (additional domain) for a particular domain name, then you cannot be refunded for that specific domain name.

Yes, absolutely.

The Multi-Domain (UCC/SAN) SSL Certificate allows you to secure multiple domains or subdomains which are hosted either on one IP address or different IP addresses. This SSL Certificate type was particularly designed to secure multiple websites within one single SSL Certificate as an easy-to-use and cost-effective solution. 

To add your Company Name and TAX/VAT number, you have to login into your SSL Dragon Account and follow these steps:

  1. Click on the “Hello, *Your Name*” button on the right top side of your account dashboard and select “Edit Account Settings”;
  2. On the ‘My Details’ page, you will find the ‘Company Name’ and ‘Company TAX/VAT ID’ field;
  3. Fill in these fields with the necessary information then click on ’Save Changes’. 

After you perform the above steps, your SSL Dragon account and all your invoices will be automatically updated with this information.

SaveSave

There are many different ways to install an SSL Certificate, and they all depend on your SSL Certificate brand, the webserver type, the operating system on your server, and the web hosting panel that you have on your server.

These being said, please check our Installation Articles to get detailed instructions on how to install your SSL Certificate on about 44 different server types, hosting panels, and operating systems.

Also, here are links to documentation on how to install your SSL Certificate on your server, based on the SSL Certificate brand that you have:
Sectigo
Thawte/RapidSSL/GeoTrust/DigiCert
GoGetSSL

We always recommend you get specialized help with your SSL Certificate installation. If you have a web developer or a system engineer, then they would be the right people to help you with your SSL Certificate installation.

Browser Compatibility

Chrome
IE
Firefox
Opera
Safari
Netscape
AOL
Camino
Konqueror

Server Platforms And Mobile Browser Compatibility

Server Platforms:
  • BEA Weblogic
  • IBM HTTP Server
  • Microsoft ISA
  • Microsoft IIS
  • Microsoft SQL Server 2005
  • Microsoft Live Communication
  • Apache
  • BEA Weblogic
  • Lotus Domino
  • OpenLDAP
  • C2Net Stronghold
  • Plesk
  • WebSTAR
  • Webmin
  • Java Web Server (Javasoft / Sun)
  • Ensim Control Panel
  • cPanel / Web Host Manager
  • Hsphere
  • C2Net Stronghold
  • iPlanet Server / Sun One
  • Java Web Server (Javasoft / Sun)
  • Lotus Domino
  • Tomcat
  • Netscape Enterprise Server
  • Novell ConsoleOne
  • Novel Webserver
  • C2Net Stronghold
  • And other SSL-Capable Servers
Mobile Browsers:
  • Android
  • Apple iPhone, iPod Safari 1+
  • Microsoft Windows Mobile 5/6*
  • Opera Mobile 6+
  • Opera Mini v3+
  • ACCESS NetFront Browser v3.4 +
  • RIM Blackberry v4.2.1 +
  • KDDI Openwave v6.2.0.12 +
  • Netscape Communicator 4.51+
  • NTT / DoCoMo
  • Nintendo Wii
  • Sony Playstation 3
  • Sony Playstation Portable

Need help securing your website? Have questions, or unsure which SSL to choose? Let our fearless dragons help you! Follow the following steps towards getting the type of help that you need.

1. Use our Wizard and find the SSL Certificate that suits you best;

2. Find your answers on our Frequently Asked Questions page;

3. Open a Ticket with our Sales, Billing and Technical Support dragons. We will answer your ticket as soon as possible. We work Monday through Saturday, from 9 AM to 11:00 PM Pacific Time;

4. Email us using our Contact Form.

2sans
Duration Price You Save
1 year £20.50
2 years £36.08
3 years £53.30
Site seal:site-seal

Order Steps

1
  • Click "Buy Now"
  • Create/Access your account
  • Submit payment
READ MORE
2
Configure the certificate in your account
READ MORE
3
Pass validation & receive your SSL Certificate
READ MORE
Go to Top